Tom & Craig

Photo taken 25th Nov '10

Brickwork designed by Craig

Photo taken 3rd Dec '10

I came to this course late and had to learn quickly.
My 1st task was to make a corner.

You must look at the drawing to make sure you know what you’re doing the whole time, to get it right. You would need to find a clean area to work. From there, you would need to make sure you load out the required bricks and mortar close by. Make sure you have got enough room to work, so it is not too tight.

To get started, you should get the correct tools for the job. Lay the 1st brick. Make sure it is plumb so then you can continue without going back to check. Check the height; you may be going too high which then requires a step-up to reach places. From there keep going back to the drawing to make sure you’re doing it correctly.

Thomas Sunderland
17. 12. 10